tag:blogger.com,1999:blog-6487788534673969493.post669235307864769852..comments2024-01-30T08:11:01.975-05:00Comments on Dragonfly DIY: Heated print beds and PLAJohn Ridleyhttp://www.blogger.com/profile/09153053667463928276noreply@blogger.comBlogger1125tag:blogger.com,1999:blog-6487788534673969493.post-68435751937479924792014-09-10T19:37:16.305-04:002014-09-10T19:37:16.305-04:00My limited experience with similar pieces seems to...My limited experience with similar pieces seems to indicate that it's important to have the heated bed for a nice flat surface, and an effective fan to keep the heat rising off the bed from overheating the small, overhanging parts. That said, for small parts like that it's probably not critical to have the bottom be perfectly flat, and they'll stick well enough to blue tape.Bill Owenshttps://www.blogger.com/profile/08049211051802893173noreply@blogger.com